International Harvester / Farmall HYDRO 100 Parts

[Categories]   [All HYDRO 100 Parts]   [All Farmall Models]  

Power Steering Cylinder Assembly - For tractor models 1066, 1466, 1468, 1566, 1568, 766, 966, HYDRO 100. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 111449, Ref: 533279R94) $330.00
Steering Arm - STEERING ARM, left hand splined. For 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 756, 766, 786, 856, 886, 966, 986, HYDRO 100. (Item #: 100888, Ref: 531248R2) $53.00
Steering Arm - Right hand splined. For tractor models 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 756, 766, 786, 856, 886, 966, 986, HYDRO 100. (Item #: 100887, Ref: 531249R2) $53.00
Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $37.00
Steering Wheel - 16 inch diameter. Mounts on 13/16 inch (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. (Item #: 101432, Ref: 385156R1) $45.00
Steering Wheel Cap - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 108550, Ref: 68837C3) $8.80
Thrust Bearing - For tractor models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $12.80
Tie Rod Assembly - Complete assembly contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. Fits HYDRO 100, HYDRO 186, HYDRO 70, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1568, 1586, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986. Fits Factory International wide front axles only. Will not fit Schwartz, Speeco, Norden or other aftermarket wide front axles. (Item #: 100869, Ref: 223313) $80.00
Tie Rod End - Tie rod end, left-hand. Notched (6), 15-3/4 inch to center of post and .092 inch diameter. For adjustable front axles. 56 to 80 on tractors: 666, 686, Hydro 70 and 86. 58 to 82 on tractors: Hydro 100, 544, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 5088, For 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 5088, 5288, 5488, 666, 686, 766, 786, 886, 966, 986, HYDRO 100, HYDRO 70, HYDRO 86. Replaces 359984R93, 384441R93, 359984R1. (Item #: 100867, Ref: 359984R93) $24.50
Tie Rod End - Tie rod end, right-hand, threaded, 3-7/8 to center of post. For tractors: 666, 686, Hydro 70 and 86, Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 5088, 5288, 5488. Not for drilled style TRW tie rod parts. For 1026, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 4156, 4166, 4186, 5088, 5288, 5488, 666, 686, 756, 766, 786, 826, 856, 886, 956, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. Replaces 384006R1, 384006R93, 384006R92 (Item #: 100866, Ref: 384006R92) $16.80
Tie Rod Tube - Tie rod tube. 18 inches long, .950 inch inside diameter, .941 inch inside diameter thread. 2 slots one end, threads other end. For 56 to 80 on tractors: 666, 686, Hydro 70 and 86. Not for drilled style TRW tie rod parts. For 1026, 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 4156, 4166, 4186, 5088, 5288, 5488, 666, 686, 756, 766, 786, 826, 856, 886, 956, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 100868, Ref: 383917R1) $23.40
Universal Parts and Accessories Category: Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87
Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $13.20
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60
Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20
Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70
Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40
Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10
Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10
Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24
No Picture Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70